Best Hobart Welders: 6 Models to Weld Like a Professional

hobart handler 210 mvp

Welding machines are something that most welders do plenty of research into before pulling the figurative trigger on a model. Since they were initially developed, welders have assisted in transforming metalworking as we know it. Nowadays, there are hundreds of MIG welder manufacturers churning out products of varying quality and skill requirements. One brand sticks out above the others: Hobart Welders. This article goes into a deep review of six of the most common Hobart welders found on the market today, contrasting their styles and eventually selecting the best option to fit the needs of beginner, intermediate, and advanced level MIG welders.

Overview of the Best Hobart Welders

Hobart’s MIG welding line consists of six MIG welders, each with their own power level and unique features, advantages and disadvantages.

Handler 100 Flux-Cored Welder

An easy-to-use, cord-fed welder that’s best suited for welding newcomers.  Boasting a 115-volt power input that allows welds up to 3/6-inch (4.8 mm of steel), the Handler® 100 Flux-Cored Welder is the perfect cost-to-performance welder.  Its 4- or 8-inch spool compatibility also makes it a versatile welder that’s ready to meet the demands of your projects.

Handler 125 MIG Welder

A dependable, easy-to-move, wire-fed welder that is perfect for a number of project demands.  Operated by a 120-volt power source, it’s capable of welds up to three-sixteenths of an inch (mild steel) and is also MIG enabled with a conveniently built-in gas valve.

Handler 140 MIG Welder

A reinforced shell makes the 140 MIG gas welder one of the most durable models yet and its cord-fed system makes it the perfect option for various projects from farm maintenance to automotive repair.  Running on a 115-volt power input that powers welds up to 1/4-inch for mild steel material you’ll breeze through even the most strenuous of job demands with ease.

Handler 190 MIG Welder

As an industrial-performance level welder with spool-gun functionality for aluminum it’s the perfect go-to option for the more serious of welders.  It’s driven by a 240V power input, is capable of welds up to 5/16 in. and is both flux- and MIG-ready.

Handler 210MVP MIG Welder

The 210MVP is highly versatile MIG-capable welder with a 2-power input power feature; 115V or 230V.  With the 210MVP you’ll be able to make welds up to three-eighths of an inch (mild steel) and it will be spool-gun ready for when welding aluminum.  It’s also cord-fed which streamlines project tasks and job completion times.  Also comes bundled with a spool hub assembly that supports 4- and 8-inch spools.

IronMan 230 MIG Welder

As a top-of-the-line, powerful, heavy-duty wire-feed welder you can expect professional, industry-leading results made possible with superior product design and function.  Powered by 230-volt input power, you’ll be able to perform welds up to 1/2-inch through mild steel and is also spool-gun prepared for aluminum.

Best Hobart Welders for MIG Welding

Hobart Handler 100 Wire Feed Welder

hobart welders handler 100The Hobart Handler 100 is the perfect welder for smaller applications. It’s great for beginners and for users who need an affordable and simple way to start welding. This MIG welder comes with the included 0.8 – 0.9 mm flux colored welding wire. The unit is capable of welding metals between 18 ga. and 3/16 in. steel, making it suitable for most purposes. The all-new design makes it resistant to the damages, sophisticated and easy to use.


  • Output 20% duty cycle: 80 A
  • Range of the current: 30 – 100 A
  • Voltage: 40 V
  • Wire feed speed: 90-320 IPM
  • Gun length: 8 feet
  • Arc activated trigger: Yes
  • Color: Black, orange
  • Dimensions: 13.5 x 10 x 16 inches
  • Weight: 44 pounds


Pros of the Hobart Handler 100

  • Great value for money
  • Well-made and comes with all essentials needed
  • Small and compact
  • Has many applications

Cons of the Hobart Handler 100

  • 8 feet welding gun
  • The user manual is unclear and complicated for beginners


The Hobart Handler 100 is a great MIG welder if you are a beginner or you are looking for an entry-level model to start welding. It has it all, but it is still an affordable model that comes ready to be used as soon as you get it. Keep in mind that this isn’t a professional welder!


It was developed for farm, domestic and home-based applications, and we agree on this fact. Also, it is known to be more desirable model, thanks to a low cost and high range of capabilities. It’s a solid starter from Hobart welders.

Hobart Handler 130 Wire Welder

hobart welders handler 130And now we have the Hobart Handler 130 Wire Welder, which is an improved version of the model we have explained earlier one. It shares almost identical constructions, and they look the same, but there are some differences. The main one is the presence of EZ mode which allows for the users to adapt the welding capabilities turning a knob. This model uses C25 gas, and it comes with ability to weld using sold or flux colored wire.


  • Rated output (20% duty cycle): 85 A
  • Solid wire capability: Yes
  • Flux colored wire: Yes
  • Range of current: 30-130 A
  • Max voltage: 31 V
  • Speed of wire feed: 50 – 400 IPM
  • Dimensions: 16 7/8 x 9 7/8 x 12 7/8 inches
  • Weight: 51 pounds


Pros of the Hobart Handler 130

  • Comes with EZ mode which is desirable
  • Supports solid wire and flux colored wire
  • Speed of wire feed
  • Developed to be used at home and farms

Cons of the Hobart Handler 130

  • Pricey considering the capabilities
  • Heavy 51 pound
  • Poorly-rated output compared to the previous model


The Hobart Handler 130 Wire Welder has been developed for beginners who want something more than the first model mentioned here. The EZ feature is one of the main advantages of the unit in question and probably the main advantage of all models we feature here. It isn’t necessarily the most affordable version, but it is still a desirable welder machine to own. Another win from the champions at Hobart Welders.


Hobart Handler 140 MIG Wire Welder

hobart welders handler 140Once again, we have a welding machine that comes as an improvement of the original version, the Hobart Handler 140. This particular model is upgraded version of the Hobart Handler 130, which we mentioned earlier on. But, this model is a much better unit, due to simple reasons. First of all, it can be used for welding steel between 24 ga and 1/4 inches. The input voltage is 115VAC, and the amperage is between 25 and 140 A. It has a MIG mode but doesn’t have an EZ mode.


  • Material thickness: 24 ga – 1/4 in
  • Max amperage: 140 A
  • Max input: 115 V
  • Gun length: 10 feet
  • MIG: Yes
  • Arc activated trigger: Yes
  • Dimensions: 12 3/8 x 10 5/8 x 19 ½ inches
  • Weight: 57 pounds


Pros of the Hobart Handler 140

  • 10 feet length of the gun
  • Supports MIG welding
  • Durable and low maintenance
  • Decent value for money
  • Has multiple purposes

Cons of the Hobart Handler 140

  • Doesn’t support EZ mode
  • Attention to details


The Hobart Handler 140 is the first model in the range that supports MIG welding, which is the main advantage of it. Then, it is the first unit to offer 10 feet welding gun. We can say that it is in the sweet spot, being in the middle between welders designed for beginners and professional ones.


Read our full review of the Hobart Handler 140

Hobart Handler 190 MIG Wire Welder

hobart welders handler 190The Hobart Handler 190 is a bit more complicated to define. This unit is capable of welding aluminum, which made it a desirable one. Furthermore, it has seven different settings allowing you to weld any metal thickness you prefer and also has a max amperage of 190 A, which is significantly higher than other models we have mentioned. Also, it comes with a spool gun ready feature.


  • Max amperage: 190 A
  • MIG: Yes
  • Gun length: 10 feet
  • Wire-speed: 40 – 700 IPM
  • Different welding settings: Yes, 7
  • Can weld aluminum: Yes
  • Dimensions: 12 2/8 x 13 5/8 x 19 ½
  • Weight: 62 pounds


Pros of the Hobart Handler 190

  • The unit is ready for welding aluminum
  • The maximum amperage is decent even for professionals
  • Supports MIG
  • It is a still compact and small unit

Cons of the Hobart Handler 190

  • The spool gun is an expensive addition
  • Gun length should be a bit longer


The unit we have here is a bit complicated to explain. It can be the best welder for beginners or a decent one for professionals. In essence, it has it all, and it is worthy of consideration. Of course, the fact it can weld aluminum makes it an even more desirable welder.


Read our full review on the Hobart Handler 190.

Hobart Handler 210 MVP MIG Wire Welder

hobart welders handler 210 mvpThis is the most powerful of the Hobart welders in the series, and it can use 115V or 230V making it suitable for countless applications. Furthermore, it will automatically choose the desired voltage. It also comes with seven different settings so that it can be used for welding all kinds of materials. Additionally, unlike some of the MIG welders on this list, it is also capable of welding aluminum.


  • Voltage: 115 or 230 V
  • Amperage: 25-210 A
  • Length of the gun: 10 feet
  • Wire feed: 40 – 680 IPM
  • MIG: Yes
  • Spool gun: Available as an optional extra
  • Dimensions: 12 3/8 x 10 5/8 x 19 ½ inches
  • Weight: 72 pounds


Pros of the Hobart Handler 210 MVP

  • A very powerful welder for different operations
  • Ready to weld aluminum
  • Usable with 115 V and 230 V
  • Chooses the voltage all by itself
  • Seven different settings of the unit

Cons of the Hobart Handler 210 MVP

  • The spool gun is expensive
  • The user manual is complicated


In the lack of a better word, we must say that the Hobart Handler 210 MVP is a powerful welder which comes with all the essentials even professionals will like and appreciate. Keep in mind that this is the most powerful model in the class and it comes ready to be used with 115 or 210 V power source. Also, it is also capable of being used for semi-professional applications and comes at a great cost.


Hobart IronMan 230 MIG Wire Welder

hobart welders ironman 230The Hobart IronMan 230 is a professional wire welder. It has been developed to provide a perfect weld every single time you use it. It can also meet the expectations of the most demanding users. The heavy-duty construction allows for the users to carry, transport and use this wire welder almost anywhere. The ability to weld aluminum is also available, but you will need an optional spool gun. In essence, this is a powerful welding machine which comes at a high price but offers you all the possibilities you will ever need.


  • Amperage: 30-250 A
  • Voltage: 38 V
  • Wire feed: 0 – 700 IPM
  • Gun length: 15 feet
  • MIG: Yes
  • Aluminum welding: Yes (spool gun is needed)
  • Dimensions: 31 ½ x 18 7/8 x 36 ½ inches
  • Weight: 185 pounds


Pros of the Hobart IronMan 230

  • Powerful and sophisticated welding machine
  • Well-made and extremely durable
  • Provides a perfect weld every single time it is used
  • Can weld aluminum
  • Gun length is 15 feet

Cons of the Hobart IronMan 230

  • The price is very high (this is a professional model)
  • It is heavy so transporting it may be difficult


The Hobart IronMan 230 is a perfection in the lack of a better word. It is one of the best and the most popular, professional welders at the moment and it offers you all the advantages and all the features you are going to need. Yes, it is pricey and heavy, but you can use it for any purpose despite the fact are you a professional or a beginner. Also, if you are a beginner, but the price isn’t an issue for you, this model is highly recommended.


Read our full review on the Hobart IronMan 230

Comparison of the best Hobart welders above

To assist you in making a right decision on Hobart welders, we will compare all of the welding machines we have included here. As such, the first model, the Hobart Handler 100, is solely for beginners and for users who need to weld a piece of metal now and then. This is a model for beginners, and this being the case it doesn’t offer many advanced features.

The situation is slightly different with Hobart Handler 130, which is MIG ready and comes with EZ feature. This unit is also for beginners, but it is far more desirable. The situation is the same when it comes to Handler 140. This is a slightly improved version of 130 model, so most of the features and capabilities are the same.

Handler 190 is a bit different. This is a semi-professional welder which is for beginners or professionals, and it will meet the requirements of them all. It is a welder in the middle. All of us can use it, and it will probably satisfy all the desires we may have. The Handler 210 is not the same welding machine. This is a professional welder which comes loaded will features, power and all you are going to need, even if you are planning to use it for professional-based applications only.

Ironman 230 is a completely separate beast. This model is extremely powerful and comes adapted for heavy-duty applications. It is capable of being used by industry operators. The sole purpose of the model is to provide a perfect weld every single time a person uses it.

Closing thoughts on the best Hobart welders on the market

Here are the best and the most appealing welders available on the market today. It is up to you to take a closer look at your requirements and to choose the welder you find perfect for your needs. We tested and compared models that can be used by beginners, semi-professionals, and professions. Now is your turn to choose the welder you find most suitable for your experience level. All we know is that if you make a right choice, you will end up with the best welder.

Flux Welders Versus MIG Welders

flux welders versus mig welders

Selecting between flux welders versus MIG welders is frequently a high-stakes gamble when buyers are on the market for a solid new welder. One major consideration that needs to be taken into effect is what you are wanting the end result of your weld to be. Another solid consideration that could spell the difference between flux core and MIG is working environment. Welders should establish if their plans are to weld indoors, outdoors, or a mobile combination of the two.

If you think you are going to be welding in an outdoor environment, you will need to establish whether or not you will have access to an overhang or shelter. After all, if you have a roof overhead and are throwing sparks, you don’t want to have a fire to deal with.

This article is a comparison of flux welders versus MIG welders. Its purpose is to determine which is most suited for one’s welding surroundings..

Comparing Indoor Efficiency: Flux welders versus MIG welders

Are you an amateur or professional welder anticipating an indoor environment for your welding tasks? If so, MIG welders are a far more appropriate welding tool type to consider for your needs. MIG welding is a cleaner wire type compared to typical flux core welding. Additionally, the welding process with MIG welders is far faster than its flux core alternative.

Not only are MIG welders cleaner and faster, but they are also quite efficient and suitable for most every day industrial and commercial applications. When compared to flux core welders, MIG welders show a far higher rate of metal transfer efficiency. The main cause of this is molten metal spatter that occurs with the higher powered flux core welding. With this spatter more wire is lost.

flux welder vs mig

MIG Welders vs Flux Core Welders: Budgetary Constraints

Although, as stated above, MIG welders are far more efficient for speed and metal transfer than flux core alternatives, they have hefty expenses for the MIG gas bottles needed. However, this cost still remains lower than the cost of flux core wire for welding. For these reasons, MIG welders are still the best option for welding indoors.

It’s important to note, though, that this cost only remains low provided that the size and quantity of rolls purchased are smaller scale. Large, bulk wire roll purchases end up making the cost of a flux core welder lower and more efficient than its MIG counterparts. It is for this reason that many larger companies with access to bulk wire buys utilize flux core for their needs, and why smaller companies and individual welders go for MIG.

Speed and efficiency aren’t the only things that make MIG welding better than flux core welding for indoor welding work. When comparing flux welders vs MIG welders in terms of penetration of metal, it is clear to see that MIG welding is far superior to flux core welding. However, gas proportions in MIG welding make it a small bit more expensive and uneconomical for use in outdoor welding. It is for this reason that flux core welding is typically the better option in outdoor welding settings.

Finding a Suitable Workspace

It is important to point out that flux welding is only superior for outdoor welding work. MIG welding would result in losses from blowing winds. However, there is nothing that can be done about the low metal transfer efficiencies present in flux welding. The low transfer rate is caused, in part, by the fact that the wire is hollow and covered in flux. Most of this flux is lost to spatter because it turns into slag in the welding process. The loss may amount to approximately 3/8 of the flux being used (roughly). It is also worth noting that flux welding results in a significant amount of spatter. For this reason, more effort is required in the clean up process when compared to a MIG welding job.

MIG Welder or Flux Core Welder?

You can use both flux and MIG welding if you are working in an environment that is open but sheltered. The shelter will serve to block any breeze from interfering with the shielding gas. However, the bottom-line recommendation for outdoor welding is a flux-core weld because it is somehow immune to the breeze effects. If you want to work in both indoor and outdoor environments, it is suggested to get yourself a MIG Welder. To summarize flux welders versus MIG welders:

  • Outdoor/Breezy: MIG Welder
  • Outdoor/No Breeze or Sheltered: Flux Core Welder
  • Indoor/General Use: MIG Welder
  • Indoor/Large-Scale Use: Flux Core Welder

If you’re in the market for a new MIG welder and are looking to compare options, please check out our 6 Best MIG Welders page.

Lincoln 210 MP Review

lincoln 210 mp review mig welding

Lincoln Electric has long been an American manufacturer of solid electrical equipment. They have been well-known for their production of high quality TIG and MIG welders. The Lincoln PowerMIG 201 MP is no exception to this. It is known to be an extremely versatile welding tool. This is mainly due to a variety of factors, including a wide range of power options.

lincoln 210 mpThe Lincoln 210 MP provides a maximum duty cycle of 40 percent at 100 amps. Amongst the tricks of the trade for this welder include MIG, flux core, DC TIG and DC stick welding. It is truly a workhorse, and it’s no wonder why it’s referred to as a Swiss army knife of a welding machine.

The PowerMIG 210 MP can weld both steel and aluminum metals measuring up to 3/8 of an inch and 3/16 of an inch, respectively. Welding hobbyists, contractors, independent welders, and instructors will find this a useful welder. The 210MP is high performing in a wide variety of tasks. Our Lincoln 210 MP review focuses on the features, pros and cons of the PowerMIG 210 MP Lincoln welder. Our focus at Tool Guides Hub is always to assist potential buyers in making informed decisions.

Now is a great time to see why the 210 MP made our list of best MIG welders, and determine whether you want to pull the trigger on one today!


Lincoln 210 MP Review – Description and Specs

lincoln 210 mp reviewThe PowerMIG 210MP measures 19 x 10.8 x 14 inches and weighs approximately 40 pounds. This makes the device compact and highly portable, simple to carry from job site to job site. It has dual voltage inputs, supporting both 120V and 230V. This makes it possible to use with any common power supply. For this reason, it can be used for welding tasks both in homes and at higher power industrial sites.

The welder has an intuitive push-and-turn digital control mechanism. This can easily reduce hassle of welder setup and usage. According to one Lincoln 210 MP review, the welder is more user friendly than other welders in its class due to the sheer ease of setup. This is also made possible by the presence of the Ready, Set, Weld feature that comes with all Lincoln welders.

The large color display on this welder easily walks new users through the setup process. This, in conjunction with its intuitive push-and-turn digital controls, makes the advanced options and setup for this welder simple to access and modify. As far as one Lincoln 210 MP review is concerned, the 210 amps of this welder provide the power needed to handle almost any job with ease.

MIG welding jobs, for example, can be performed on stainless steel wire measuring up to 5/16″ thick. The same can be done for aluminum up to 3/16″ thick. For flux core material, the Lincoln 210 MP can handle the largest jobs, and can handle up to 5/32″ stick electrodes. The DC TIG works through the welder’s Touch Start technology. Additionally, the 210 MP’s readiness for any material is also possible in part to its sturdy sheet-metal housing.

Features of the Lincoln 210 MP

As one of the most versatile and powerful MIG welders on the market, the Lincoln PowerMIG 210 MP boasts an impressive list of features, including:

  • The “Ready. Set. Weld” digital color display makes setup simple, guiding you through each step in the process while providing experienced welders with advanced options and settings.
  • Inverter technology makes the unit both lightweight and efficient.
  • Dual voltage inputs (120V or 230V) allows for easy connection to any common power supply.

The unit also includes a comprehensive package of accessories:

  • Magnum® PRO 175L Gun (10 ft./3.0 m)
  • 120V and 230V input cables
  • Work cable and clamp electrode holder
  • Regulator
  • Gasless nozzles
  • Gun cable liner (pre-installed in gun)
  • Spindle adapter sample (2 lb.)
  • Spool of SuperArc® L-56® Mild Steel MIG Wire Sample (1 lb./0.45 kg)
  • Spool of Innershield® NR®-211-MP Flux-Cored Wire (0.025 in./0.6 mm)
  • Contact tips (0.035 in./0.9 mm)

Specifications of the Lincoln 210 MP

  • Brand name: Lincoln
  • Model: PowerMIG 210 MP, K-3963-1
  • Height: 14 in.
  • Length: 19 in.
  • Width: 10.8 in.
  • Duty Cycle: 40% @ 100A, 25% @ 200A
  • Input Voltage: 115V/230V
  • Process Type: Flux Core, MIG, Stick, TIG
  • Product weight: 40 lb.
  • Weld Thickness: 24 gauge – 3/8 in.
  • Wire Feed Speed Range: 50-500 ipm
  • Welding Amperage Range: 20-220 A (230V), 20-140A (115V)

Pros and Cons of the Lincoln PowerMIG 210 MP

lincoln 210 mp tig reviewThe first advantage of this welder is its ability to tackle several different types of welding tasks. This makes it suitable for those who need to weld different types of metals with different strategies. Secondly, this welder is incredibly portable given its compact size and weight. It is, therefore, easy to carry around from job to job. This welder also comes with intuitive digital controls and a large color display that makes it easy to setup and operate.

What this all means is that the PowerMIG 210 MP does not require advanced skills to operate. This makes it suitable for a beginner to use quickly and efficiently. The adjustable power input makes it possible to use at any common plug at a home, or a heavier duty plug on an industrial site. The strong and sturdy metal build of this welder assures durability as well.

However, no welding machine is perfect, although some come close. According to one Lincoln 210 MP review, the Power MIG is much higher priced when compared to other welders. Also, the performance of this welder in its TIG and stick welding is low in comparison to its MIG welds. Additionally, the fact that it does not have inverter technology means that you cannot power it with a generator.

Other Lincoln MIG Welders

If the Lincoln PowerMIG 210 MP doesn’t quite fit your needs, the Lincoln family of MIG welders includes several other options with a wide range of features.

Lincoln PowerMIG 140 MP MIG Welder

This affordable, versatile multiprocess unit can handle MIG, DC TIG, Stick and Flux-Cored household welding tasks. The 120V input connects easily to standard home outlets, and the PowerMIG 140 MP is capable of MIG welding 30-140 amps, DC TIG welding 10-120 amps and stick welding 25-90 amps.

Its simple two-knob operation allows even beginning welders to easily control wire feed speed and voltage, and a single button makes process selection changes a snap. At less than 35 pounds, this lightweight, compact welder is perfect for jobs around the house and on the go.

Lincoln PowerMIG 180 Dual MIG Welder

The 64-pound PowerMIG 180 Dual MIG Welder offers dual 120V and 208/230V input power capability, making it an outstanding welder for use at home, in the shop or in the field. It’s powerful enough for sheet metal and light frame auto body work as well as light industrial and farm applications.

Patented split wire guides deliver optimal wire alignment, while dual gear-driven drive rolls consistently provide positive traction. The PowerMIG 180 is equipped with Lincoln’s Diamond Core Technology, which ensures minimum spatter and a forgiving arc.

The no-hassle tool-free design allows fast and easy input power changes, wire spool mounting, wire drive service and polarity changes for the ultimate in convenience.

Lincoln Power MIG 256 MIG Welder

For more demanding jobs, the Lincoln PowerMIG 256 raises the bar for MIG and flux-cored welding in light industrial, maintenance or repair settings. Like the PowerMIG 180, it includes high-performance Diamond Core Technology and Lincoln’s 100 percent wire supporting split wire guide system. The digital display makes it easy to monitor your voltage and wire feed speed.

The kit also includes a 15-foot Magnum PRO gun and cable, extended-life Copper Plus contact tips and the Coil Claw cable management system to keep everything organized and in its proper place. At 245 pounds, this welder isn’t made for portability, but it delivers the power you need for heavy-duty welds at home or in the shop.

Alternatives to the Lincoln 210 MP

If you like the features and performance of the Lincoln PowerMIG 210 MP but want to know how it stacks up against comparable welders in its class, consider these options by other well-known manufacturers.

Miller Electric Millermatic 211 MIG Welder

The Millermatic 211 is known for its user-friendly setup, but with its new Advanced Auto-Set feature, it’s also more versatile, offering five different wire and gas combinations along with .024, .030 and .035-inch wires. Like the Lincoln 210 MP, the Millermatic uses inverter technology to deliver high-performance arcs in a portable, 38-pound unit.

Multi-voltage plug design lets you connect to common 120V or 240V receptacles without needing any tools—simply choose the plug that fits the receptacle and connect it to the power cord. Its proprietary “Smooth Start” design has earned the Millermatic 211 a reputation as the best-starting machine in the small MIG category, while its newly enhanced cast-aluminum drive system with calibrated tension knob provides consistent feeding and easy setup for up to 15-foot MIG guns.

Hobart Handler 210 MVP MIG Welder

The Hobart Handler 210 MVP MIG Welder packs a maximum of 210 amps into a small, portable case that weighs in under 80 pounds. A wide range of voltage settings and infinite wire feed speed control let you calibrate the machine for each individual job, while fine control of output parameters mean improved arc performance, better bead appearance and minimal clean-up.

Similar to the Millermatic 211, the Handler 210 connects to both 115V and 230V power receptacles without requiring tools; simply select the plug that fits the receptacle. An industrial cast aluminum wire drive system delivers durable, professional-grade wire feed performance, while the quick-select drive roll provides three grooves for easier setup: two for different size solid wire and a third for flux-cored wire.

Tweco Fabricator 3-in-1 211i MP Integrated Welding Package

The Tweco Fabricator 3-in-1 211i MP Integrated Welding Package is an impressive, compact multiprocess welding system that includes MIG, Stick, and TIG welding capabilities. The 58-pound portable unit is ideal for light to medium fabrication of steel, stainless steel and aluminum in a wide range of settings.

Inductance control allows for consistent arc stability and spatter control, while the infinite voltage control settings deliver outstanding starting performance with every weld.

Recommended Accessories

While the Lincoln PowerMIG 210 MP comes with nearly every accessory you’ll need for the welding process itself, you will need to invest in a few essential safety-related items before you fire up your welder and get to work.

  • Helmet: Wearing a high-quality darkening helmet while welding is non-negotiable. Not only does the helmet shield your face and neck from high temperatures, but it also helps prevent debilitating eye damage that can occur with exposure to the welding arc’s powerful infrared light.
  • Gloves: A thick pair of welding gloves protects hands and arms from electricity, high heat and metal spatter during the welding process.
  • Welding jacket: A flame-resistant cotton or leather jacket creates a protective barrier between your upper body and the heat and sparks produced by the welding torch. The jacket’s fit should permit full range of motion without creating gaps that expose your skin or clothing to high heat or flame.
  • Fire extinguisher: An A-B-C rated extinguisher should be close at hand to manage any kind of fire you may encounter.

Additionally, you may want to consider adding these items to your workshop as time and funds allow:

  • Cart: A quality cart keeps your welder, gas cylinders and accessories secure, organized and ready to use. You’ll want a model that includes smooth-rolling wheels, locking casters and plenty of space for dry storage of tips, grounding clamps and other supplies.
  • MIG light: A MIG light illuminates your work area, allowing you to weld more safely in tight, low-light areas (such as under a car).
  • Angle grinder: After welding a joint, an angle grinder comes in handy for grinding the weld bead down, especially during root and fill passes in pipe welding. Angle grinders can also be used to prepare base metal surfaces by removing rust and other oxides before grinding.
  • Chop saw: A good chop saw enables you to precisely cut stainless steel, aluminum and other metals and consistently create 45-degree miters.

Wrapping Up the Lincoln 210 MP

The Lincoln 210 MP welder is more than suitable for hobbyists, educators, and contractors wanting a durable machine to handle different tasks. It is also a great choice for those anticipating more than just MIG welds.The 210 MP works great with TIG and stick welding as well.

However, if your tasks are only centered on MIG welds, this might be too much for you, and it can be recommended to go for a more MIG focused welder, like one of the many models from Hobart Welders.

Lincoln Electric has a long history of building powerful, high-quality welders that deliver outstanding performance and unmatched customer satisfaction year after year. The Lincoln PowerMIG 210 MP more than lives up to this lofty reputation, providing a reliable option for beginning and experienced welders alike. With its versatile capabilities in MIG, TIG, stick and flux core welding, there’s not much you can’t accomplish with this lightweight yet mighty machine.