Super Deal Commercial MIG 130 Review

Picking up the art of welding can be an intensive task. Even after you learn the techniques, you’ll have to practice them for hours on end. If your welding machine comes with a lot of complicated instructions or mechanisms, the learning process can take forever & run into unnecessary delays. At the start of their career, a welder needs a machine that’s clear-cut and minimalist without sacrifices. It needs to be effective enough to work as long as its owner. It should also be able to keep up with the surrounding competition. With all that being said, we’d like to formally introduce you to the Super Deal Commercial MIG 130.

Operating the Super Deal Commercial MIG 130

With only a few buttons & knobs on the face, along with advanced settings that are relatively easy to get access to, this is a forerunner in the market as far as clarity.

It comes with a digital soft-key control panel that’s generously sized & spaced. It’s set up that way so you can even control settings with your gloves on (when you have any welding machine on, it’s a good idea to keep hands covered at all times.)


The welding current of the Commercial has an available range between 50 and 120 AMPs. It has a 35% duty cycle at 60 AMP and 10% at 105.

With this capacity, users are able to perform a varied amount of tasks. Whether you’re in an industrial environment or just working on a project at home, you’re good to go.


Features of the Super Deal Commercial MIG 130

This machine comes with a range of features that make it a competitive presence amongst the MIGs available today.

The body is composed of PVC plastic, which allows it to take a bit of a beating without it getting too worn down. On the panel side, every control is spaced out & designed for efficient operation.

When your work starts to get more nuanced, the panel allow allows you to adjust temperature & wire feeding speed, so you can work with different metals & thicknesses while using the same device.

This adjustable induction, enabled by waveform control tech, helps bring out the best in your performance. It does this by:

  • Increasing the depth of fusion
  • Reducing dangerous spatter
  • Maintaining a consistent soft electric arc

While you’re doing that work, you can also be ensured that your gun won’t be at harm. That’s because it comes with a copper tip that prevents buildup from slowing things down.

There’s going to be a little bit of that over time, of course, but a quick & easy replacement mechanism means you’ll be able to get back at it in no time.

Even if you’ve been going at it for a bit longer than expected, the built-in fan & thermal overload protection mechanism are on guard to be sure you don’t have to worry about the heat.

Outside of the features that come on the machine itself, people purchasing the package get the full deal.

They include a reel of 0.9mm, 0.55lbs welding wire, a basic facemask, and a wire brush with a chipping hammer. There is also a 2.5M torch, two extra copper tips, and a ground cord to top it off.



Weighing in at less than 40 pounds, the Commercial is one of the most portable devices available. This is especially considering what comes in that package. This is partly thanks to the lack of a gas cylinder, along with the build.

With its dimensions clocking in at 20.2 x 15 x 12.5 inches, all that fun can be stored in almost any nook & cranny in your garage or workspace.

Pros of the Super Deal Commercial MIG 130

  • If you’re doing light work that involves sheet metal or another similar material, this is the one for you.
  • The variation allowed by the different settings is perfect for beginners who need to get to know the different materials they could work with during their welding career.
  • The interface hosting these settings, as we mentioned before, is one of the most intuitive & accessible available. You can get comfortable with the essentials, and the advanced settings are easy to access as well.
  • The included package of wire, mask, etc. is everything you need to get started on a welding project right out of the box.
  • At just under $132, this is one of the most accessible entryways into the world of welding, especially for people focusing on home projects.
  • Since it only requires 110 volts to power, you can plug it into any standard outlet in your house & be off to the races.

Cons of the Super Deal Commercial MIG 130

  • Those who want to move on to larger, more industrial projects will have trouble applying the Commercial to those needs, given its limitations as far as structure & welding current.
  • The plastic handle isn’t as durable as the rest of the body. This means that improper handling could potentially lead to it breaking.
  • As far as the supplies that come with the machine, one user warns that the wire they supply could potentially be too thin for the machine’s automatic feeding mechanism.
    • They recommend buying MIG wire separately, which thankfully shouldn’t set you back any further than $20 per spool.
  • Users should also be aware that the wire heating starts the second the power switch comes on, leaving little room for error in that regard. Even if you aren’t a novice, this can still be a potential safety issue, so be careful.

The Bottom Line

As long as you stay focused & aware while welding, which you should be doing anyway, the Super Deal Commercial MIG 130 can be an excellent way for you to dive into it and pick up the basics.

Even if you’re a professional welder & just need something to work in a pinch for home projects, this is a solution that’s effective, portable, and affordable without making vital compromises.

There’s a lot to know about welding, and there are a lot of options to be considered. If you want to read some more product reviews, or learn more about MIG welding in general, has a wealth of information for you to explore.


Leave a Comment