Hit 140 MIG Welder Review

If you’re completely new to welding, you should prepare yourself for how intensive and technically challenging it can be. It’s an incredibly rewarding task, but it does come with a harsh learning curve for beginners.

To make sure new welders get the most out of their first foray into the experience of welding, they’re best investing in a rig that’s simple, easy to operate, and can still keep up with the more advanced machinery. That’s where the HIT 140 MIG Welder comes into play.

Operating the HIT 140 MIG Welder

In terms of simplicity and ease-of-use, you can’t get much more basic (yet sturdy) than the HIT 140 MIG Welder. This is the ideal tool in hand for newbie welders who want to fully develop their skills with something simple to operate. Although, that’s not to say the HIT 140 MIG Welder doesn’t have its fair share of decent features.

Operating it is as easy as can be, with just a power switch, some inputs, and two dials (for wire feed and voltage) on the front face of the machine. This is as simple as it gets – meaning welders can spend more time focused on getting the job done, instead of playing around with a complicated interface.


The specifics of the power output are as follows:

  • Plugs into standard 120-Volt outlet
  • Output range 20-90 amps (140A peak)
  • 60 Hz
  • Single phase
  • 27-Volt no load, duty cycle 20% at 90A

With these kinds of numbers – and this capacity – you’ll be able to weld mild carbon steel (up to 24 gauge or 3/16 inch thick) in one pass. This means the rig is perfect for home OR industrial setting.

Features of the HIT 140 MIG Welder

Versatile, powerful, and compact – this unit is a real competitor when it comes to welding gear that’s perfect for newcomers. It’s light on advanced features, but that doesn’t mean it doesn’t impress. You can still get plenty of work done with this little unit.

Of all the features, you might be most impressed with the total heat control, which provides an infinite range of heat settings. This means getting the most out of the machine is a breeze, especially considering that it works with three MIG and flux-core wire sizes (with or without shielding gas). Those sizes are .23 inches, .3 inches and .35 inches.

The system also offers a host of excellent safety features, such as advanced thermal overload protection. Something else that new welders will appreciate is the handy indicator light, which will alert you to pending shutdowns and keep you ‘in the know’ at all times about the state of your unit.

The HIT 140 MIG Welder also comes with near enough everything you’d ever need to get started welding. Here’s a list of what you can expect to find included:

  • 6 ft. MIG torch
  • Gas hose (with regulator)
  • 10 ft. TWECO Type MIG gun
  • One MIG nozzle
  • Two 0.30 inch contact tips
  • 10 ft. ground cable (with earth clamp)
  • Hex wrench
  • Clipping hammer/brush
  • Welding face shield

With such a large selection of included components, it’s easy to see why so many newcomers have gravitated towards making the HIT 140 MIG Welder their first welding purchase. If you want everything you need to get on the job straight away, this is the ideal choice.


In terms of portability, you can’t go wrong with the HIT 140 MIG Welder. With a compact size of 14.75 x 9.5 x 18.5 inches, and a weight of 44 lbs, carrying this welder around should be no problem. Moving it around would be made even easier if you were to purchase a carrying case.

Pros of the HIT 140 MIG Welder

  • With only 120-Volts needed to power it, you can pretty much plug the HIT 140 MIG Welder into any standard outlet and be ready to begin welding in minutes. No specialized electrical equipment or adapters required.
  • In terms of intuitive interfaces and hardware that’s easy to understand, this machine ranks up near the top. There are only a few buttons and dials to figure out and the rest is simple – leaving you more time to get welding.
  • With all of the included components (see the features section above), you really are getting value for money when purchasing this fairly inexpensive unit.

Cons of the HIT 140 MIG Welder

  • If you’re looking for something to tackle a huge, industrial problem with, the HIT 140 MIG Welder probably isn’t for you. Although it’s versatile, the range of material (and material size) it can weld is limited slightly.
  • The cooling fan within the welder has been known to break if exposed to volatile situations. Don’t drop it or leave it anywhere that an accident could occur and you should be alright.
  • It’s a common complaint that you’ll sometimes find in hardware such as this, but some reviews around the web have made a point that the instructional manual provided with this welder leaves a little to be desired. The good news is that you can usually find better advice and guidance online anyway.

The Bottom Line

Whatever skill level you’re at, the HIT 140 MIG Welder is a solid, simple to operate piece of kit. It’s fairly no-frills, but that just helps to avoid distraction while you’re working. This rig would be ideal for newcomers and veterans alike; both at home and in the workplace.

As with all welders, make sure to stay aware of your environment and keep focused on the task at hand. Safety always comes first when using tools like these. Always remember to use the proper protection and take all necessary precautions when welding.

If you still have other questions or just want to read up on some more of the latest product reviews, make sure to check out what else we have to offer at ToolGuidesHub.com – you’ll be sure to find the answer to any DIY question and a whole array of helpful guidance.

Leave a Comment